Ice Machine Indicator Light Description

- Nov 21, 2018 -

The five indicators of the ice machine monitor the following conditions:

The green light is on: the machine is powered on;

Yellow light is on: the refrigerator is full of ice, and the machine automatically resumes work 10 seconds after the ice is taken away;

Yellow light: The water tank is short of water. When the water comes in 10 seconds, the machine automatically resumes work;

Red light is on: the condenser temperature is too high or the ambient temperature is too low;

Red light flashes: 3 minutes delay status at boot (normal);

Red light is on: the ice drill is turning wrong or the speed is lower than 850.r.P.m;

The red light is shining: the evaporator temperature is high: the evaporation temperature has not dropped below -1 °C after 10 minutes of starting;

201805160827495546209.jpg

Note:

1. The reason why the condenser temperature is high: the fan does not work; the condenser is blocked; the condensing temperature sensor or the P.C plate is damaged and the Z ambient temperature is too high.

2. Reasons for high evaporation temperature: refrigerant shortage; condensation temperature is too high; evaporation temperature sensor or P.C board is damaged.


Related News

Related Products

  • Portable Small Liquid Nitrogen Flask 10L Cryogenic Dewar Tank for Ice Cream
  • Dewar Tank for Liquid Nitrogen 30L Aluminium Container For Sale
  • Attachment Of Liquid Nitrogen Container, Pump, Pen
  • Liquid Nitrogen Storage Tank 15L Freezing Equipment of Cell and Samples
  • Back Fat Probe Is Used to Measure the Thickness of the Animal's Back
  • Commercial Ice Maker Machine for Sale