Ice Machine Does Not Fall Off

- May 23, 2018 -

    Cause of fault: The fault of the water temperature probe is detected, which makes the intelligent control system unable to effectively sense the water temperature and work, misjudging the program error, or controller failure.

    Maintenance method: Use a multimeter to measure the resistance of the water temperature probe (When the water temperature in the tank approaches 0°C, unplug the three conductors in the control box and test the resistance of the two wires on both sides). If the resistance is 27K Above, then judge

    If the controller is bad, it should be replaced. If the resistance is lower than 27K, you must disconnect any of the two wires and adjust the resistance to 27K to 28K through the series resistance.


    Ice machine is not water:

    Because of the bad water pump, it is impossible to press water onto the ice tray. If there is a condition, wash the pump every 2 months, if the water filtration system is not good, clean it once a month, or more.

    Change the water filtration system. Otherwise scale can jam the pump or even burn it. The entire ice making water circulation system should be cleaned regularly so as not to affect the ice making effect.

Related News

Related Products

  • Portable Small Capacity Liquid Nitrogen Container 3L 6L Mini Tank 2L in Beauty Industry
  • Pigs, Dogs, Cattle, Sheep with Doppler Ultrasound Machine of the Fan Type Probe
  • Laboratory Snowflake Ice Maker Machine Price
  • Liquid Nitrogen Storage Tank 15L Freezing Equipment of Cell and Samples
  • In Animal Husbandry Liquid Nitrogen Storage Tank 35L Dewar Vessels Used for Frozen Semen
  • Medical Liquid Nitrogen Biological Container 50L 60L Tank Used for Frozen Vaccine